PIP ELEGL01 : Overall Electrical One-Line Diagram Guideline
This Practice is a guideline for developing Overall Electrical One-Line Diagrams (OEOLDs) by engineers and designers. It covers the generation of new OEOLDs and may not apply to the revision of...
View ArticleCIE 015:2018 : Colorimetry, 4th edition
This publication provides the recommendations of the CIE concerning colorimetry. Specifically, it includes the use of the standard colorimetric observers and standard illuminants, the reference...
View ArticleSAE AMS6428L : Steel, Bars, Forgings, and Tubing 0.78Cr - 1.8Ni - 0.35Mo -...
This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.
View ArticleASTM D5048-18 : Standard Test Method for Measuring the Comparative Burning...
1.1 This fire-test-response standard contains a test method for small-scale laboratory procedures to be used to determine the relative burning characteristics and the resistance to burn-through of...
View ArticleASTM E352-18 : Standard Test Methods for Chemical Analysis of Tool Steels and...
1.1 These test methods cover the chemical analysis of tool steels and other similar medium- and high-alloy steels having chemical compositions within the following limits: Element Composition Range,...
View ArticleASTM E3070-18 : Standard Test Method for Shear Thinning Index of...
1.1 This test method describes the determination of the shear thinning index of a shear-rate dependent (non-Newtonian) fluid using a rotational viscometer. A value of the shear thinning index of unity...
View ArticleASTM E2864-18 : Standard Test Method for Measurement of Airborne Metal Oxide...
1.1 This test method covers determination of surface area of airborne metal oxide nanoparticles in inhalation exposure chambers for inhalation toxicology studies. Surface area may be measured by gas...
View ArticleASTM E2535-07(2018) : Standard Guide for Handling Unbound Engineered...
1.1 This guide describes actions that could be taken by the user to minimize human exposures to unbound, engineered nanoscale particles (UNP) in research, manufacturing, laboratory and other...
View ArticleASTM E2234-09(2018) : Standard Practice for Sampling a Stream of Product by...
1.1 This practice establishes lot or batch sampling plans and procedures for inspection by attributes using MIL-STD-105E as a basis for sampling a steady stream of lots indexed by acceptance quality...
View ArticleASTM D8029-18 : Standard Specification for Biodegradable, Low Aquatic...
1.1 This specification covers performance requirements for biodegradable hydraulic fluids with low aquatic toxicity used in industrial/mobile hydraulic applications.1.2 In some cases, biodegradable...
View ArticleASTM D8011-18 : Standard Specification for Natural Gasoline as a Blendstock...
1.1 This specification covers natural gasoline to be used as a hydrocarbon blendstock in ethanol fuel blends for flexible-fuel automotive spark-ignition engines (Specification D5798). In the United...
View ArticleASTM D7900-18 : Standard Test Method for Determination of Light Hydrocarbons...
1.1 This test method specifies a method to determine the boiling range distribution of hydrocarbons in stabilized crude oil up to and including n-nonane. A stabilized crude oil is defined as having a...
View ArticleASTM D7825-18 : Standard Practice for Generating a Process Stream Property...
1.1 This practice covers generating a Process Stream Property Value (PSPV) from the application of a process stream analyzer, which requires the use of several ASTM standards. These standards describe...
View ArticleASTM D772-18 : Standard Test Method for Evaluating Degree of Flaking...
1.1 This test method covers the evaluation of the degree of flaking (scaling) of exterior paints by comparison with photographic standards.1.2 The values stated in SI units are to be regarded as the...
View ArticleASTM D6877-13(2018) : Standard Test Method for Monitoring Diesel Particulate...
1.1 This test method covers determination of organic and elemental carbon (OC and EC) in the particulate fraction of diesel engine exhaust, hereafter referred to as diesel particulate matter (DPM)....
View ArticleASTM D6246-08(2018) : Standard Practice for Evaluating the Performance of...
1.1 This practice covers the evaluation of the performance of diffusive samplers of gases and vapors for use over sampling periods from 4 to 12 h and for wind speeds less than 0.5 m/s. Such sampling...
View ArticleASTM D6158-18 : Standard Specification for Mineral Hydraulic Oils
1.1 This specification covers mineral and synthetic oils of the types API groups I, II, III, and IV used in hydraulic systems, where the performance requirements demand fluids with one of the following...
View ArticleASTM D6080-18a : Standard Practice for Defining the Viscosity Characteristics...
1.1 This practice covers all hydraulic fluids based either on petroleum, synthetic, or naturally-occurring base stocks. It is not intended for water-containing hydraulic fluids.1.2 For determination of...
View ArticleASTM D5762-18a : Standard Test Method for Nitrogen in Liquid Hydrocarbons,...
1.1 This test method covers the determination of nitrogen in liquid hydrocarbons, including petroleum process streams and lubricating oils in the concentration range from 40 μg/g to 10 000 μg/g...
View ArticleASTM E634-18 : Standard Practice for Sampling of Zinc and Zinc Alloys for...
1.1 This practice covers the sampling of zinc and zinc alloys to obtain a sample suitable for quantitative spark atomic emission spectrochemical analysis. Included are procedures for obtaining...
View Article
![Cloonee, Yandel & ATLAC – Movimiento – Single [iTunes Plus M4A]](http://i.imgur.com/Q8tO40p.jpeg)