Quantcast
Channel: Latest Standards From Techstreet
Viewing all 114851 articles
Browse latest View live

FED AA-C-101 : CABINETS, HAZARDOUS MATERIAL (HM), SHIPBOARD QUALIFIED

0
0
FED AA-C-101 establishes the requirements for hazardous material (HM) cabinets (formerly known as lockers) that are qualified for shipboard use.

MIL MIL-DTL-3943/13L : Decoration, Legion of Merit, Officer and Legionnaire

MIL MIL-DTL-3943/403 : DECORATION, DISTINGUISHED CIVILIAN SERVICE, NATIONAL SECURITY AGENCY

MIL MIL-DTL-15665/110A : Insignia, Branch of Service, Officer, Chaplain, Hindu Faith, U.S. Army

MIL MIL-PRF-2104M : Lubricating Oil, Internal Combustion Engine, Combat/Tactical Service

0
0
This performance specification covers lubricating oils suitable for lubrication of reciprocating compression-ignition internal combustion engines and for power transmission fluid applications in combat/tactical service equipment (see 6.1). Grade SCPL has been added in this revision and is intended to be an all-season lubricant providing extended drain intervals and reduced fuel consumption (see 6.1).

MIL MIL-PRF-46167D Amendment 1 : LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, ARCTIC (SUPERSEDING MIL-PRF-46167C)

MIL MIL-DTL-32505A : Armor Plate, Aluminum, Alloy 7017 Weldable and 7020 Applique

0
0
This specification covers two wrought aluminum armor plate alloys for welded and non-welded applications in nominal thicknesses from 0.500 to 4.000 inch, inclusive (see 6.2). The weldability of wrought aluminum alloy AA7017 armor has been determined for Class I armor for these thicknesses, only; 1.000‰Û and 1.500‰Û. Class I (AA7017) material is a direct replacement for MIL-DTL-46063H w/Amendment 2 material, namely AA7039 for new design and if specified (see 6.2), for old design or repair/replacement. The acceptance requirements and the weldability of wrought aluminum alloy AA7020 armor have not been determined for Class II armor prior to the publication of this specification. Current testing is on-going and when completed this specification will be revised to contain all pertinent requirements and conditions for Class II (AA7020) armor. Class II aluminum alloy AA7020 is listed in this specification as a place holder until the above mentioned testing program is completed. Tables will be populated with the AA7020 requirements; however, for now the values will be replaced with ‰Û÷TBD‰Ûª (to be determined).

DID DI-MGMT-81452 Notice 2 - Validation 2 : MASS PROPERTIES CONTROL AND MANAGEMENT PROCESS (MPCMP) REPORT


DID DI-MGMT-81501A Notice 2 - Validation 2 : WEIGHT AND BALANCE REPORT FOR AIRCRAFT

DID DI-MGMT-81503A Notice 2 - Validation 2 : POST-DESIGN WEIGHT ANALYSIS REPORT (SUPERSEDING DI-S-3584)

DID DI-MGMT-81504A Notice 2 - Validation 2 : INERTIA (MASS PROPERTIES) REPORT FOR AIRCRAFT

MIL MIL-DTL-24784D : MANUALS, TECHNICAL: GENERAL ACQUISITION AND DEVELOPMENT REQUIREMENTS

MIL MIL-P-18547A Notice 2 - Validation 1 : Pump, Rotary, Power Driven, Naval Shipboard Main Lubricating Oil Service

MIL MIL-P-19131 Notice 2 - Validation 1 : Pumps, Rotary, Power Driven, Miscellaneous

0
0
This specification covers positive displacement, power driven, miscellaneous, rotary pumps.

MIL MIL-G-18916 Notice 2 - Validation 1 : Governors, Steam Driven Pump, Pressure Regulating, Naval Shipboard

0
0
This specification covers the requirements applicable to the design and construction of pump pressure regulating governors for steam driven pumps for miscellaneous services aboard Naval ships.

MIL MIL-M-24476B Notice 2 - Validation 1 : Mounts, Resilient: Pipe Support, Types 7M50, 6M150, 6M450, 6M900, and 5M3500

0
0
This specification covers resilient mounts which are intended primarily for use in supporting pipes and isolating their vibration.

MIL MIL-C-11015E Supplement 1A : CAPACITORS, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE)

MIL MIL-DTL-27599E Amendment 1 : Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect, Environment Resistant, Solder Contacts, General Specification for

SAE ARP834 ARP243B : Nomenclature, Aircraft Hydraulic and Pneumatic Systems

SAE J855_200911 AMS7233D : Rivets, Solid, Alloy-Corrosion Resistant, 67ni 31cu

Viewing all 114851 articles
Browse latest View live




Latest Images